An Endurance Brand New 4 watt (4000 mw) DPSS Laser Module For Marking on all types of materials including metals.
Attach the laser head to your 3D printer, CNC, plotter and get an ultimate laser marker without extra investments.
Use the same software you use to operate your machine.
Mark on all types of metal
ONE OF THE BEST JEWELRY MARKING HEAD ON THE MARKET
Engraving on gold
Laser Marking on Silver, Gold, Platinum & Palladium!
Palladium cufflinks
Silver earrings
White gold
A 4 watt DPSSL installed on a CNC 3018 with GRBL 1.1H firmware
Compatible with lightburn software
In-depth metal engraving (marking)
Sapphire glass engraving (marking)
Very tiny engraving (marking)
Use PWM output to wire the laser
Easy wiring with EggBot, GoodEnoughCNC, MPCNC, OpenBuilds OX CNC Machine, Maslow, MillRight CNC, Next 3D, Ooznest OX, Scan2CAD and CNC, Shapeoko, WhittleCNC, X-Carve, Ortur, Neje, Shark (by NextWave), Eleksmaker, CNCC Laseraxe, CNC 3018, Sain Smart (Genmitsu) and many other. Key benefits of an Endurance DPSS laser module.
- Compatible with almost any 3D printer and any CNC machine or engraving machine
- Accurate and deep engraving due to high peak power
- High laser engraving precision 57 um (microns) (20 um available upon a special request).
- High reliability of the laser module 10 000+ hours.
- An advanced and universal and compatible mounting bracket.
ALL LASERS PASS INDIVIDUAL TESTS BEFORE THE SHIPMENT.
Application of an Endurance 4 watt Nd:YAG 1064 nm impulse infrared (1064 nm) laser unit.
Metal marking: Most types of metal: gold, silver, copper, aluminum, iron, stainless steel, galvanized steel, etc);
Most of the Plastics (PC, PVC, PE, HDPE, ABS, PPR, PET, HIPS, PS, PP, PPO, PA, POM, PMMA, AS, etc), plastic film, print, and package.
Software compatibility
Our DPSS laser module is compatible with any software you run to control your 3D printer / CNC machine / XY plotter (works great with GRBL and Marlin firmware).
We recommend: an Endurance free plugin to create g-code
Compatible software: T2Laser / Lightburn.
4 watt DPSSL Control
via PWM (5V) TTL wires.
Can be operated via analog input (can be offered upon requests)
The frequency of the PWM controller (TTL signal) is 25KHz.
Test the laser with a 3.3V battery (PWM)
Drawings and sketches
Get all you need in one package to get started.
- DPSS laser module (1064 nm) with 4 watt optical power.
- AC/DC 12V 25A (PSU).
- Protective goggles for 1064 nm wavelength.
- Advanced mounting bracket.
- Protective gloves.
- Focusing plate.
- Stickers and magnets from Endurance Lasers LLC
Install on any CNC frame (3018 CNC example)
10 watt DPSSL with an air nozzle
10 watt DPSS installed on CNC 3018
CNC 3018
10 watt DPSSL driver + PSU
Laser beam focusing
An Endurance DPSS laser a Gaussian laser beam distribution.
Endurance installs 2 types of lenses on a DPSSL.
Laser beam spot for F=20 | F=30 mm lens
Laser beam depth for F=20 | F=30 lens
The best focus for F=20 } F=30 lens depending on the range from the laser source
Laser beam depth for F=20 | F=30 lens
F=20 mm (28 mm range between the lens and the laser)
Focusing range: 20 mm
Focal beam spot: 62 um (min power)
focal depth: +10 mm
F=20 mm (30 mm range between the lens and the laser)
Focusing range: 35 mm
Focal beam spot: 160 um (max power)
Focal depth: +-30 mm
F=20 mm (50 mm range between the lens and the laser)
Focusing range: 32 mm
Focal beam spot: 80 um (max power
Focal depth: +-8 mm
F=20 mm (80 mm range between the lens and the laser)
Focusing range: 20 mm
Focal beam spot: 51 um (min power)
focal depth: +-0.75 mm
F=20 mm (130 mm range between the lens and the laser)
Focusing range: 19 mm
Focal beam spot: 39 um (min power)
focal depth: +-0.5 mm
F=30 mm (28 mm range between the lens and the laser)
Focusing range: 35 mm
Focal beam spot: 45 um (min power)
Focal depth: +-8 mm
F=30 mm (80 mm range between the lens and the laser)
Focusing range: 33 mm
Focal beam spot: 35-36 um (min power)
Focal depth: +-5 mm
F=30 mm (100 mm range between the lens and the laser)
Focusing range: 45 mm
Focal beam spot: 58 um (max power)
Focal depth: +-4 mm
F=30 mm (130 mm range between the lens and the laser)
Focusing range: 33 mm
Focal beam spot: 25 um (min power)
Focal depth: +-2 mm
F=30 mm (150 mm range between the lens and the laser)
Focusing range: 37 mm
Focal beam spot: 38 um (max power)
Focal depth: +-1.8 mm
A wiring example
DPSS control box
AC/DC power supply
Wiring to Acorn CNC
Wires come out of the DPSS LaserBox:
Power supply wires
1 – 12V+ wire
2 – 12V- (GND/COM) wire
3 – Ground wire
PWM cable
4 – PWM (Red) wire
5 – GND (Black wire or bare) wire
Wires to the laser.
Wires “1”, “2”, “3” are connected to the power supply (img2).
Compatible Endurance mounting brackets. Easy to install!
A custom 3D printed mount
Delivery time
3-5 days via DHL express
Order an Endurance 4 watt DPSS Laser module
