Upgrade your laser machine with Endurance powerful laser modules

Endurance lasers is not responsible for the correctness of the presented data in this post below. All data was taken from the open resources on the internet.

Endurance customers say about Endurance lasers & our tech support

Sunwin overview

SUNWIN 40X50CM 12V USB Desktop Laser Engraving Machine DIY Logo Picture Marking (500MW)

Sunwin assembly

Sunwin technical details

This engraving machine is for non-commercial level, handmade DIY work. The laser can not be used for a long time when it works one time. It can not laser marking the stainless steel plate The kit is normally shipped disassembled for DIY assembly. This engraving machine is for non-commercial level, handmade DIY work, toys level, only for individual play.

Features:

Machine demension:56*44*16CM
Max. Engraving Area: 50*40cm
Laser module: 12V high power laser module (with fan)
Laser Power: 500mW
5.5W can cut 3MM linden wood
Stepper motor: Two Y-axis 42 stepper motors
Control board: 2 axis USB standard control panel
Power supply: 12V (100-240V)

What is in the box?
1 X 500MW 40*50CM Laser Engraving Machine (packed disassembly)
1 X Protective Glasses
1 X Instructions

CNCC LaserAxe (HBOT model)

HBOT new design is more compact, full metal body + rail is more accurate, software adjust the power to quickly replace the laser head design, adjustable focus design. New glasses! Get the key, inch standard! Submit software tutorials! 25 * 25 cm round trip! No limit for a small table! New engine! Standard 2 axis board, can be upgraded to 3 axis. 100 mW / 200 mW / 300 mW / 500 MW / 1 W / 1.6 W / 2.5 W / 5.5 W in addition to full blue power with UV protection!

Equipment size: 430mm * 400mm * 85mm (L * W * H)
Engraving area: 300mm * 400mm
Laser power: 100mW / 200mW / 300mW / 500mW / 1000mW / 1600mW / 2500mW / 5500mW (support higher power)
Laser power supply: 12V
Input voltage: 12V
Number of axes: X axis double Y axis (axis control panel supports 3)
Accuracy: 0.1mm
Key Features: Low Light, Positioning, Engraving, Gray Engraving, Contour Carving, Engraving

Product advantages:
1, HBOT new structure, more compact and lightweight Power transmission software support
100 mW / 200 mW / 300 mW / 500 MW / 1000 MW / 1600 mW / 2500 mW / 5500 MW
2, quick change of laser head design + Adjustable focal length of the top and bottom design
3, The maximum engraving area is 25 * 25cm
4, Full metal body + rail production, but also the appearance of high solid
5. The software is easy to use, a free upgrade for life.
6, HBOT new design more compact and more accurate, portable laser engraving machine
7, thread unlimited object height, can be placed directly on the top of the work * (for example, directly on the thread table)
8, the whole ship, get the goods only need access to the computer data cable, connect the power supply, install the driver, which is ready to use

Shipping list:
Power supply A machine
Safety glasses for data transmission
Test Board Hex Key Set

Getting started with LaserAxe engraver

CNCC LaserAxe software

Universal engraver 3000 mw / 15000 mw

Feedback from Jennifer after a few months about Universal laser engraver

Attached are pictures of the machine and a screen shot of my order. I have tried numerous avenues to get this machine to work with no positive progress.

3000mW 50x65cm DIY Mini Laser Cutting Printer Engraving Engraver Machine Desktop

This 3000mW DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning, and freedom positioning functions. It only needs you to connect it to the computer, then you can print any pictures you like with your own creativity.

Getting started with a universal engraver 3000 mw

Speed – Productivity by design

Time is money – the time per laser job is crucial for the success of your business. Increase your production capacity with an engraving speed of 34 cm/sec and laser power of 3000mw

All sensitive components of the laser engraving machine, such as lenses, mirrors, or motors, are protected against dust. This results in higher productivity and lower operating costs for you.

Intuitive laser software and smooth operation

The engraving machines are equipped with the most potent visual software. Work in your usual graphics program and send your jobs to the laser pick and drop. Equipped with a variety of options, the software is suitable for both beginners and experienced engravers. 

With the dynamic status display and 100% view of the work area, the status of the laser and processing progress can be seen directly on the machine, thus avoiding unnecessary downtime. Thanks to the ergonomic access, the processing table and materials can be inserted quickly and easily, without straining your back.

Endless Application

Engraving Material:

wood,bamboo,plastic,paper,leather,bank card,rubber

can not engraving material:metal,stone,ceramic,shell,light-reflecting material, transparent material

Features

There is no limit to the size and height of the engraving object. You can directly put the machine on it. -The software is easy to use and can be directly read into jpg, bmp, svg, Gcode image file engraving. -New metal holder for quick laser and other peripherals, up and down adjustment of the laser focus. -The new custom V-slot aluminium matching rolling bearing X24 is better and more stable. -Y-axis dual-motor, using a new custom 1.3A 42 stepper motor. -The laser power is adjustable to suit a variety of materials.

Specifications of a universal laser engraver:
Material:stainless steel and acrylic
Working Voltage:DC 12V
Laser Power:3000mW
Engraving Area:65x50cm (maximum)
Size:72x63cm
Control software: Benbox software support power can be adjusted, weak light positioning

Engraving Material Note:
1.can engraving materials:wood,bamboo,plastic,paper,leather,bank card,rubber
2.can not engraving material:metal,stone,ceramic,shell,light-reflecting material,
transparent material

Cutting Material:
It can only cut foam, paper, thin leather material.
Note:
! In the process of using, please wear professional protective glasses
! Forbid children to play
! Suggested that the laser light in the case of focus, the power is too strong, do not use strong
light to illuminate the skin
! Avoid the use of flammable ob

ects or gases in order to avoid causing a fire or explosion
!Don’t update the firmware

Package includes:
1x DIY Desktop Mini Laser Cutting/Engraving Machine
1x Laser goggles

Eleksmaker A3

EleksMaker EleksLaser-A3 Pro 3D Printer 2500mW Blue Laser Engraving Machine DIY

First launch of an Eleksmaker laser engraving machine

Benbox software for Eleksmaker – getting started

EleksCAM software tutorial for Eleksmaker

Eleksmaker A3 Specifications:

Neje

NEJE master 2 mini Laser Engraving carving Machine engraver creative DIY printer

Neje intro video

Neje specs

General Specification

Model：                    Master 2 mini
Optical Power:         450nm 2.5W
Control Board:          1 x MCU + Wireless control + MEMS
Satety Protection:     MEMS
Working Size:           110 x 120 mm
Pixel:      1466 x 1600 px
Dot pitch:  0.075mm
Software:   NEJE APP for Android, NEJE Wireless APP for iOS / ipadOS / macOS, NEJE software for windows，N-Scanner APP for Android.
NEJE Software Upgrading Service: YES
NEJE Cloud Gallery:  YES
NEJE Scanner function:  YES
Frame material:    CNC Cutting Composite plate, aluminum alloy, acrylic.
Can Engrave：    MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
Can Not Engrave：    Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material
Continue working:    Unlimited
Wavelength：    450nm
Beam Shape：    Dot (Focusable)
Drive:  Built-in
Lens Material:           D-ZK3
Heatsink Material：    Aircraft Aluminum + Brass Shell
Luminous Color：    Blue
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 2A
Image Format: .bmp \ .jpg \ .png \ .nc \  etc..
Plug Type: EU / US (Optional)

Package Includes:

1 x Laser Engraving Machine
1 x goggle
1 x Manual
1 x ON/OFF Switch Cable
1 x USB Cable
1 x 12V2A Power Adapter
1 x Eu adapter
1 x L-shaped wrench
2 x Test Paper
1 x wooden block
1 x Focusing plate

Neje with LaserGRBL software

MakeBlock XY 2.0 plotter

Makeblock XY Plotter Robot Kit (w/ Electronic Version)

MakeBlock XY overview

XY Plotter Robot Kit is a drawing robot that can move a pen or other instrument to draw digital artwork on flat surface. It can also be developed into a laser engraver by adding the Laser Engraver Upgrade Pack.

XY Plotter V2.0 can be controlled by 2 software, mDraw and Benbox.

How to assemble a MaekBlock XY 20. plotter

Getting started with Makeblock XY 2.0 engraving machine

All you need to know about a MakeBlock XY 2.0 plotter

XY Plotter Robot Kit V2.0

This is a robot kit for drawing digital images on a flat surface with a pen or other tool. The kit can also be used as a laser engraver by adding a laser engraving resource kit. XY Plotter Robot Kit V2.0 consists of more than 60 kinds of components from Makeblock, including beams, brackets, motors, etc. XY Plotter V2.0 is controlled by 2 programs: mDraw and Benbox.

mDraw is an open-source middleware developed by Makeblock

Compatibility: mDrawBot (mScara, mCar, mEggBot, mSpider), XY Plotter Kit (Servo Mode, Laser Mode)
OS: Windows, Mac
Supported file type: * .svg, * .bmp (convert to * .svg)

Benbox is compatible with both servo and XY plotter laser mode. At the same time, Benbox supports grayscale engraving and also edits numbers and symbols in the software.

WainLux K6

WAINLUX K6 Laser Engraving Machine, Portable Laser Engraver 3000mW, Laser Printer Engraver Etching Range 3.15″×3.15”, Support WIN/Mobile System, DIY Art Marking, Logo Design

Wainlux K6 into video

Wainlux K6 getting started info

WAINLUX K6 LASER ENGRAVER-A GOOD HELPER FOR DIY

WAINLUX is a modern enterprise integrating professional R&D, production and sales of Micro laser equipment.

The company has a far-sighted vision and insight into the future and using advanced technology and premium services to create greater value and a win-win concept for all our customers !

WAINLUX K6 is a compact, powerful and easy-to-use laser engraving machine, capable of engraving on various services and materials.

Including wood, bamboo, leather, craft paper, cardboard, felt, plastic, rubber, acrylic, etc.

If you were a DIYer, craftsman or someone that loves all the wood craft projects.

This is the ideal portable art studio you can take anywhere !

Tips:

1. Please refer to the PDF file named ” User Instruction” in our detail page to download e-version instruction when you use it.

2. Please pay attention to adjust focus for this laser engraver before engraving.

How? Put the supplied black paper under the laser module, and turn the laser module left and right till all the light are gather into one brightness point and even you turn left or right, the light will become bigger. it means it was adjusted focus.

3. Please adjust the engraving parameters several times in our app to get the best engraving effect.

4. No matter which software you used, you need to download it yourself first. you can download it from our website in the e-version user instruction.

Wainlux K6 first lauch

Four Quick-Step to Use Our Laser Engraver!

• Step 1: Download the our software for your computer or cellphone via the supplied U-disk or from our official website.
• You can refer to the e-version user manual in our amazon page to download the software for cell phone or computer step by step.
• Step 2: Adjust the focus for our laser engraver.
• How? use the supplied black paper, turn the laser head left and right till all the light gathered into one brightness point even you turn left or right it wont become bigger. it mean it has been adjusted focus
• Step 3: Connected our laser with your cell phone or computer. Please refer to our user manual
• Except for WAINLUX K4 model, all the other model laser engravers are wifi connections.
• 1) for cell phone, please open you cell phone’s hotspot function, change the password to ” aaaabbbb” and wait for our laser to connect with your cell phone, please wait enough time, it has not connection for a long time, please try to power the hotspot off or our laser on and off to have another try;
• 2) for computer, ensure that you download the software or driver successfully in step 1, go to our app, click the u-disk symbol, and the color for the symbol will turn from grey to green. it mean ” connected”
• Step 4: Adjust the engraving parameter in our app to get the best engraving result.
• We have four engrave mode: Black and white, grayscale, cutting and sketch. Choose the right mode , and adjust the engraving power and depth.

Wainlux jl4 laser engraver

WAINLUX JL4 Laser Engraver 7W 20W Engraving and Cutting Machine Laser CNC Router LOGO DIY Mark Printer Support WIFI APP Connection Compressed Spot Laser – 7W Normal

WAINLUX JL4 Laser Engraver, Powerful Desktop Laser Engraving Machine, Supports Win & Mobile WiFi Connection, Laser Marking Machine Etching Range 5.51″×5.12″, DIY Logo Design (7W)

WAINLUX is a new born but faster growing laser engraving machine manufacturer.

WAINLUX try to provide laser engraving machine of all level to all the customers around the world.

Customers can enjoy logo engraving, cutting, craft DIY projects anytime and anywhere with our laser engraving machine.

We welcome customers all around the world to come to us to chat.

WAINLUX JL4 is a small, compact, portable, and functional desktop DIY laser engraving machine.

if you were a DIYer, artist, designer, craftsman, handyman and like all the wood, paper craft projects. This little engraving gadget is definitely a good handy tool you don’t want to miss. it is small and lightweight, so you can stay at home engraving or just take it out with you to do the craft project.

Wainlux jl4 demo video

Wainlux jl4 specification:

Ortur laser master 2

ORTUR 32 bit Laser Master 2 Laser 15W/7W/20W Engraving Cutting Machine Printer

Ortur laser master 2 PRO installation video guide

Ortur laser master 2 data specs

Installing  15 watt DIY DUOS Endurance blue 445nm laser on Ortur LM2 frame

Upgrade your Ortur laser master 2 with a high-power ultimate 10 watt PLUS PRO laser

Ortur laser master 2 assembling video guide

SainSmart Genmitsu  LE5040

Genmitsu LE5040 CNC Laser Engraver Machine

High-Efficiency Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Software The LE5040 uses LaserGrbl, high-performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.

Perfect compatible system Use LaserGRBL or LightBurn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.

Genmitsu LE5040 CNC Laser Engraver Machine SPECIFICATION

• Frame Size: 645 x 515 x 185mm(25.4 x 20.3 x 7.3”)
• Working Area: 500 x 400mm(19.7 x 15.7”)
• Laser Power: 5.5W, Fixed Focus
• Max Travel Speed: 10000mm/min
• Power Supply: DC 12V/5A
• I/O: mini USB
• Stepper Motor: 42 stepper motor
• Software: Lasergrbl, Candle, Compatible with all GRBL software
• Supported OS: Windows XP, Windows 7, Windows 8, Windows 10

WHAT’S IN THE PACKAGE in Genmitsu LE5040 CNC Laser Engraver Machine

• 1 x LE5040 CNC Laser Engraver Machine(Parts need to be assembled)
• 1 x Goggles
• 1 x User Manual
• 1x LightBurn GCode License Key

Getting started with Sainsmart LE 5040 engraving machine

Laser engraving on chocolate with Genmitsu LE5040 CNC Laser Engraver Machine

Atomstack Cronos A5 PRO Laser 40W Engraving Machine Wood Cutting Design Desktop ATOMSTACK

New A5 PRO Laser 40W Engraving Machine Wood Cutting Design Desktop ATOMSTACK

Atomstack A5 30 watt laser/engraver review

Atomstack A5 30 watt laser/engraver description:

1. UpgratedUltra-fine 0.23mm*0.23mm Laser Focal Area
   2.New eye protection design
2. 410x400mm Large Carving Area
3. Upgraded High-quality Laser
4. Full-metal Structure
5. Quick Assembly Design
6. Precise Scale Lines

Atomstack A5 30 watt laser/engraver feature:

1. New eye protection design: The laser protective cover perfectly protects your eyes, filters UV light for 95%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.

2. Solid and easy installation structure design: The full-metal structure design makes the machine more solid, it will reduce the vibration of the machine and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.

3. Fixed-focus laser: No need to rotate the lens to focus, the focal length of the laser is a fixed value, move the lens up and down close to the surface of the object to start carving.

4. High-energy, ultra-fine laser:laser power is 4.5-5W, ultra-fine laser focal area is reduced to 0.23mm^2, high-density laser can easily cut 12mm thick wood, black acrylic; can directly engrave smooth stainless steel metal, ceramics.

5. Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MACs system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

6. Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.

7. Integrated stepper motor and shaft: The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable.

Specification of ATOMSTACK A5 PRO:

A DIY Engraving machine

Getting started with a DIY engraving machine with an Endurance 10 watt diode blue 445nm laser

How to assemble a DIY engraving machine

Getting started with a DIY engraving machine

An Acan engraving machine

12W Mini Laser Engraving Machine Metal Steel Iron Stone Carving DIY Printer Mark

Item specifics

Acan machine overview

Material: Aluminum Alloy + acrylic, strong and durable, high accuracy.

Drive system: stepper motor(step accuracy: 0.00625mm)

Max. Engraving Area: 140*200mm

Engraving speed: 0.02-0.2 seconds / pixel

Laser power: 12W, average 6.5-7.5W

No limit on object’s size,the machine can be set and worked on the object, eg,

Interface:USB

Features: Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm

Power supply: input AC 100V-240V, 47Hz-66Hz

Power adapter:DC 12V 4A

Machine Dimensions: 28*32*23cm

Machine weight: 2.4KG

Packing weight:4.5KG

Software: Our ac master software, supports Chinese, English, Russian languages.Simple & easy to use.

Support Windows 7/8/10

Super-reduced instruction, 1 byte of instruction accounted for more than 40%

The explanation rate is 30 times faster than Arduino+grbl,, and instantly be able to complete the task of interpretation active instruction; shortest path algorithm can shorten the time.

Acan software problem

Foxalien machine

CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

FoxAlien machine overview

• 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
• Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe. The controller has a 3.5” touchscreen LCD which also functions as an offline controller. The input voltage is 110V.
• It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and etc. It’s great for home use and business.
• Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software.
• Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into drag chain for easy management.

4040-XE FoxAlien complete build, review and first cut

Specifications of 4040-XE FoxAlien:

• Model: 4040-XE
• Active Working Area: 15.75 x 15.75 x 2.17 inch (400*400*55mm)
• Spindle Power: 300W
• Stepper Motor: NEMA 23
• Accuracy: 0.1mm
• Maximum Moving Speed: 2000mm/min
• Input Voltage: 110V/220V
• Input Current: 110V/10A; 220V/5A
• Control Method: Computer & Controller
• Support Software: Compatible with Grbl-control software
• Support OS: Windows XP/7/8/10, Linux, Mac OS
• Machine Size: 29.92 x 24.4 x 14.17 inch (760*620*360mm)

Package List of 4040-XE FoxAlien:

• 1x 4040-XE CNC Router (main parts pre-assembled)
• 1x Controller
• 1x 300W Spindle
• 1x MDF working table
• 10x Engraving Bits
• 10x Nano Blue Coating End Mills (0.8mm-3.175mm, 1/8” shank)
• 4x Hold-down Clamps
• 1x Power Supply
• 1x USB Card Reader
• 1x Memory Card
• 1x Z Probe
• 1x User Manual
• Packs of screws and tools
• 20W Fixed Focus Laser Module Kit
• Anti-Laser Shield

Incorrect laser power output while using PWM signal for 5500 mw (SainSmart Genmitsu) blue diode laser. The PWM does not work correctly.

Testing of an Ortur diode blue 5500 mw (5.5 watt) laser module

A real customer review about greyscale laser engraving  with LE 5040 laser module

Learn more about how to upgrade your existing machine with a more powerful laser. Replace your laser module.

An upgrade kit for your Ortur, Eleksmaker, CNCC Laseraxe, Neje, Insma desktop engraving machine & SainSmart Genmitsu CNC

Upgrade your Chinese laser from eBay / Amazon

All you need to know about GRBL firmware >>>

TOP — 20 things you can make with the laser

The Top 10 Things You Can Do with a Diode Laser

Old eyeglasses temples renovation