The board will support
– Possibility to connect up to 4 Peltier with current up to 12A each. Controls pairs of 2 Peltier, for example, for a “soft” shutdown, only one pair can be turned off
when the lower temperature is reached, thereby compensating for the transfer of heat from the other pair.
– Operation from 24 or 12V. (Configuration by jumpers)
– When operating from 24V, you do not need a separate DC for 12V.
– Ability to connect 2 thermal sensors
– Flow control, if not, turn off the Peltier so as not to freeze the heat exchangers
– Ability to control the inclusion, shutdown of the pump and fans.
– control of PWM and EN signals, if trouble – blocking of these signals.
– full plug and play, assembly of the chiller without soldering, only connection of connectors
– 100% compatible with the control module
Some abilities of our thermal regulator board:
1. Disconnect the diode when overheating.
2. Disable Peltier (TEC) at low temperatures to avoid moisture.
3. Display of working temperature.
4. Peltier indicator.
5. Powered by FAN.
6. There is a FAN connector.