Ultimaker 2 extended

Additional information

Description

3D printer Ultimaker 2 Extended + – development of the company Ultimaker, which allows you to print such materials as ABS, PLA, Flex, Nylon, CPE.

This modification has a large print area of 223 x 223 x 305 mm, allowing you to implement even the most complex and ambitious ideas, while maintaining high quality up to 20 microns.

The 3D printer comes with four nozzles of different diameters: 0.25, 0.4, 0.6 and 0.8 mm.

3D Printing Basics – A Beginner’s Guide to Getting Started

Manual

Loading...

Taking too long?

Reload document

| Open in new tab

Download [1.32 MB]

Basic Software

Download simple 3D printer software (slicer):

• Ultimaker Cura
• Repetier-Host

Test models for printing on Ultimaker 2 extended 3D Printer

Calibration check and first print model.

XYZ 20mm Calibration Cube

This is a simple calibration test cube for your 3D printer.

https://www.thingiverse.com/thing:1278865

Cali Cat

Cali Cat is designed to be the purrfect initial calibration and benchmarking print.

https://www.thingiverse.com/thing:1545913

Two towers

Ultrafast and economical stringing test

https://www.thingiverse.com/thing:2219103

Fast full test

https://www.thingiverse.com/thing:2656594

Settings for 3D printing

Basic settings for printing with various filament.

Final printer settings depend on model and filament!

PLA

• Nozzle temperature – 200℃
• Bed temperature – 60℃
• Start speed – 20 mm/s
• Printing speed – 60 mm/s
• Fan – 100%

ABS

• Nozzle temperature – 230℃
• Bed temperature – 100℃
• Start speed – 20 mm/s
• Printing speed – 40 mm/s
• Fan – 0%
• Raft

PETG

• Nozzle temperature – 235℃
• Bed temperature – 70℃
• Start speed – 20 mm/s
• Printing speed – 60 mm/s
• Fan – 80%