TST-SF1325GL Metal/non-metal laser cutting machine
Description
Additional information
| Working axes | 6 axes (J1, J2, J3 , J4, J5, J6) |
| Working radius | 1811mm |
| Range of travel (maximum speed) | |
| J1 axis | 340°/370° (optional) (195°/s) 5.93rad/ 6.45rad(optional) (3.40rad/s) |
| J2 axis | 260° (175°/s) 4.54rad(3.05rad /s) |
| J3 axis | 458°(180°/s)8.00rad(3.14rad/s) |
| J4 axis | 400°(360°/s) 6.98 rad (6.28rad/s) |
| J5 axis</td > | 360°(360°/s) 6.28 rad (6.28 rad/s) |
| J6 axis | 900°(550°/s ) 15.71 rad (9.60 rad/s) |
| Permissible arm load | 20kg |
| Axial forces | |
| J4 | 44Nm |
| J5 | 44Nm |
| J6 | 22Nm |
| Inertia on about here | |
| J4 | 1.04kg.m2 |
| J5 | 1.04kg.m2 |
| J6 | 0.28kg.m2 |
| Repeat positioning accuracy | ±0.05mm |
| Weight of robotic arm | 250kg |
| Portal assembly weight | 3000kg |
| Cooling type | Water chiller |
| Type of installation | Floor-mounted, wall-mounted, suspended |
| Electrical parts | Schneider |
| Control system | Fanuc |
Description
Fiber optic laser cutting machine with a manipulator (robot) TST-LF1800 is designed for shaped cutting of metal structures of complex volumetric configuration. Good for cutting non-standard products. Six-axis feed allows you to cut any surface at any angle.
The machine is equipped with FANUC robotic arm and FANUC operating system (Japan). This is one of the most common CNC systems in the world, which makes the work on the machine clear and simple. There are FANUC training centers in Russia and it is not difficult to find a trained specialist.
The portal design allows access of the robotic arm to any point of the working hemisphere.
