TST-DCL-1812 150W Universal Precision Laser Cutting Machine for Metal and Nonmetal
Metal laser type – Fiber optic RAYCUS (China)
Description
Additional information
Metal Laser Power | 500W | |
Metal laser type | Fiber optic RAYCUS (China) | |
Laser power on non-metal | 150W | |
Laser type | RECI Z6 CO2 sealed laser tube (China) | |
Laser power control | software | |
Control system | Au3Tech | |
Working area | 2500x1250mm | |
Cutting speed | 25-10000mm/min | |
Travel speed | 20000mm/min | |
Minimum Line Width | 0.2mm | Positioning accuracy | ±0.02mm/m |
Scaling accuracy | ±0.06mm/m | |
Repeat accuracy | ±0.015mm | |
Thickness cutting Stainless steel Black metal Galvanized Wood/plywood Acrylic MDF | 3.0mm 6.0mm 2.0mm 18mm 30mm 10mm |
|
Drive Type | TBI Ball Screw + Delta Servo Drive | |
Head Type | Au3Tech | |
Guides | HIWIN | |
Gantry type | Lightweight, aircraft aluminum | |
Supported formats | AI, BMP, PLT, DXF, DST, etc. | |
Cooling system | Water chiller | |
Power supply | 220V/50Hz | |
Power consumption | 3500W | |
Gross weight, kg | 1000 | |
Description
Precision laser machine TST-LF1325LC 500/150W* with a large working area of 1.25×2.5m comes with a precision ball screw servo drive and is equipped with two types of emitters and two heads. The 500W fiber optic RAYCUS is designed for cutting metal up to 6mm, and the powerful 150W RECI emitter for cutting non-metal materials such as acrylic and plywood up to 20mm. Such equipment makes it possible to use the machine for high-quality cutting of metal, and without the use of oxygen, with air (up to 3 mm) and, if necessary, quickly and efficiently cut and engrave non-metallic materials. In terms of size, it is suitable for both standard metal sheets, and for large sheets of plastic or plywood.
The range of applications of such a machine is very wide: laser cutting of thin metal, laser cutting engraving of non-metal materials (acrylic, plexiglass, plastic, wood, plywood, leather, fabric, etc.),
Materials used :
Ferrous metal, stainless steel, acrylic, plexiglass, plastic, wood, ceramic, glass, bamboo, rubber, leather, fabric and other non-metal materials.
* due to continuous development and improvements, the appearance of the machine may differ from that shown.
Equipment
• Laser machine – 1pc
• Laser tube 150W – 1pc
• Laser emitter 500W – 1pc
• Chiller – 1pc
• Extractor hood – 1pc
• installed Software – 1 pc.
• Operating manual and software – 1 pc.
• Accessory kit – 1 pc
• Stabilizer 20kVA – 1 pc
