TST-1390 150W Universal Laser Cutting and Engraving Machine for Metal and Nonmetal
Work area: 1300x900mm
|Laser type||CO2 sealed laser tube PRR-1800|
|Laser power control||software|
|Interface||High-speed DSP controller AWC708 C|
|Work area||1300x900mm rack + honeycomb|
|Optics (lenses, mirrors)||China|
|Minimum symbol/font||cyr Figure: 2mm|
|Drive type||Stepper motor|
|Software compatibility||CorelDraw, AutoCAD|
|Supported formats||AI, BMP, PLT, DXF, DST, etc.|
|Cooling system||Water CW5000|
The laser machine TST-GS1390 150W budget series with a large working area is equipped with a powerful emitter and a modified laser head with interchangeable optics, which allows cutting not only thick non-metallic materials (acrylic and plywood up to 15-20mm), but also thin metal (up to 1.0mm). ) using oxygen. Such equipment can significantly expand the scope of the machine. The low price of such equipment makes it affordable for small industries. Depending on the selected operating mode, set programmatically or manually, you can cut and engrave the material.
The range of applications of such a machine is very wide: laser cutting of thin metal (black steel and stainless steel), laser cutting and engraving of non-metal materials (acrylic, plexiglass, plastic, wood, plywood, leather, fabric, etc.), and also laser engraving of glass, ceramics, marble, granite, anodized aluminum, metal products.
Ferrous metal, stainless steel, acrylic, plexiglass, plastic, wood, ceramics, glass, bamboo, rubber, leather, fabric and other non-metallic materials.
• Laser machine – 1pc.
• Laser tube 150W – 1pc.
• Lenses, mirrors (China) – 1set
• Chiller CW-5200 – 1pc.
• Air compressor – 1pc.
• Extractor hood – 1 pc.
• CD with software – 1 pc.
• Electronic key to software – 1 pc.
• Operating manual and software – 1 pc.
• Set of accessories – 1 pc ;