TSG-C250130 Metal laser cutting machine 650W

Description

Additional information

Description

Metal laser cutting machine TSG-C300150 is a technological equipment that combines optical, mechanical and electrical systems. The installation organically combines laser and computer technologies, high efficiency of CNC control systems. This achieves the possibility of rapid and efficient processing of a variety of metal materials. The process is characterized by speed, a clean surface and a small cutting width, a slight heating effect, which is especially important when cutting a metal sheet.
Metal laser cutting machine TSG-C300150 is widely used in various production and technological lines: metal shields and products, sheet metal structures, various electrical equipment cases, artistic designs.

Main features:
High beam quality and stability
High efficiency low loss optical path
Clean and smooth surface after cutting
Can be cut without using oxygen and other gases
High cutting accuracy allows you to make precision products without further processing
Auto-focus for cutting uneven surfaces
Imported servo motor – Panasonic.
Imported reduction system.
High-quality guides and lead screw imported from Taiwan – Hiwin.
The most advanced capacitive auto focus tracking system.
Cast iron laser generator holder.
The most stable and advanced control system based on signal processor (DSP SCM) as motion control module.

Machine Features:
With the special design of 1064nm Nd:YAG solid state laser source (Yttrium Aluminum Garnet (YAG) doped with neodymium (Nd) ions), this equipment is the best suits the processing of metal materials.
The moving parts have a two-dimensional layout, making it easy to install the materials to be processed.
The machine is completely designed in an all-in-one principle, which makes it easy to install.
High precision: precision cutting of a variety of parts that require fine workmanship, and arts and crafts.
Small hot zone, high stability, smooth and accurate laser cutting, no post-processing required.
Stable performance: perfected YAG laser cutting machine is ideal for most industries production and processing of metal.
The presence of numerous advantages compared to CNC stamping press:
1. A design of any complexity, traced on a computer, can in turn be made on a laser cutting machine with a YAG source and CNC.
2. After forming an image on a computer, the product can be immediately manufactured without the use of molding technology, which contributes to the accelerated development of new products and a significant reduction in their cost.
3. Both program cutting and surface cleaning can be performed using the automatic tracing system of a YAG laser machine.
4 With the laser cutting machine, complex processes that are difficult to implement with a CNC punching press become available.
5. The machine can produce high-quality products with a surface finish that is difficult to obtain with a stamping press.
6. On the machine The YAG laser can cut round and square tubes, which is not possible with a CNC punching press.
7. The use of a laser cutting machine with a YAG source can easily produce a body of a molded product (thickness less than 0.5 meters) with the necessary slots and holes, which is unattainable on a CNC punching press.

Technical advantages:
Advanced solid-state ND:YAG laser technology, dual xenon lamp design, high power output, gold-plated laser cavity, improved energy efficiency.
Completely metal-enclosed and dust-proof optical system, greatly extending the service life of mirrors and solving the problem of laser power reduction on the machine used for several days.
Latest Panasonic A5 series servo motor, capable of auto-compensation of the cutting path with guaranteed accuracy.
The machine is equipped with 3 drives axles with three lead screws. The lead screw is regarded as the most valuable and most accurate of the moving parts of a mechanical drive. Both the lead screw and guides are supplied by HIWIND from Taiwan.
The most advanced capacitive auto-focus system maintains a constant distance between the laser head and the metal plate during high-speed movement.
Powerful editing function is compatible with a variety of imaging software already optimized processing of traditional CNC code.
A special quenching type tracking system, combined with a powerful smoke exhaust device, reduces the influence of the strong dusting effect common in metal processing. distance to the source, reducing the reflection area of the laser beam and enhancing the cutting effect.
The laser holder is made of cast iron and has sufficient strength and rigidity to avoid deformation during long-term use, causing the beam path to deviate.

Configuration

Name

Description

Notes

Switched laser power supply

High-frequency pulsed laser cutting.

Stable power,
stable performance.

YAG laser emitter system

>

Designed and constructed with German technology.

Highly reflective gold-plated surface ensures maximum laser energy transmission.

Laser machine optical system

Totally metal-enclosed and dust-proof optical system.

Prolongs the life of mirrors.

Position indication system

p>

Red light position indicator

A thin red beam with a small spot indicates the current position with high accuracy.

Fully automatic tracking system

The most advanced capacitive non-contact tracking system

Provides cutting quality by automatically adjusting the focal length during the process.

Cutting head system

Special magnetic reinforced cutting head.

Effectively prevents the cutting head from being heated by the products of the process.

Precision CNC worktable system

High-precision CNC ball screw worktable.

Timely removal stress, effectively prevent deformation.

Lead screw and guides

Made by HIWIN, Taiwan.

High precision t, easy installation, long service life.

Drive system

Panasonic servo drive, Japan.

High speed and rotation stability, reliable operation, capable of automatically compensate for free play and ensure cutting accuracy.

Lubrication system

Centralized oil supply system.

Effectively ensure the accuracy and extend the life of moving parts

CNC system

Computer control, special programs for CNC laser cutting machine.

High-speed VLSI motion control signal processor ensures cutting accuracy.

Drawing format support

Compatible with AutoCAD, CorelDraw, etc.

File support: PLT, Al, DXF, DST, JPG, BMP, GIF, PNG, TGA, TIF, etc.

Circulating cooling system

Temperature stabilized 7P type external water cooling system.

Provides effective cooling of the laser cavity and mirrors.

Cutting speeds using oxygen:
Stainless steel:
1.0 mm: 3000 mm/min
1.5 mm: 1800 mm/min
2.0 mm: 1300 mm/min
3.0 mm: 800 mm/min
4.0 mm: 350 mm/min
5.0 mm: 200 mm/min
6.0 mm: 100 mm/min

Carbon steel l:
1.0 mm: 2800 mm/min
2.0 mm: 1200 mm/min
2.5 mm: 800 mm/min
3.0 mm: 600 mm/min
4.0 mm: 350 mm /min
5.0mm: 260mm/min
6.0mm: 120mm/min
8.0mm: 80mm/min

Aluminum
1.0mm: 2600mm/min
br> 2.0 mm: 1000 mm/min
3.0 mm: 400 mm/min
4.0 mm: 300 mm/min
5.0 mm: 150 mm/min

Bronze
1.0 mm: 2300 mm/min
2.0 mm: 1500 mm/min
3.0 mm: 700 mm/min

Materials used:
Ideal for cutting stainless, carbon, alloy and spring steel , copper and aluminum sheet, gold, silver and titanium, cylindrical products and pipes.

Equipment

• Base (table) – 1 pc.
• Laser emitter with drives – 1 pc.
• Laser power supply system – 1 pc.
• Cooling system (chiller) – 1 pc.
• Exhaust system – 1 pc.
• Control system with computer – 1 pc.
• Software – 1 pc.
• Operation manual and software – 1 pc.
• Set of accessories (SPTA) – 1 pc.