Laser machine TST-2515 80W
- Platform size 300x500mm motorized perforated table
- Engraving speed ≤500mm/s
- Cutting speed ≤300mm/s
Description
Additional information
| Laser Power | 50W |
| Laser type | CO2 sealed laser tube |
| Laser power adjustment | software |
| Interface | USB |
| Platform size | 300x500mm motorized perforated table |
| Engraving speed | ≤500mm/s |
| Cutting speed | ≤300mm/s |
| Positioning accuracy | ±0.05mm |
| Laser pointer | yes |
| Minimum symbol/font | 1.5mm Cyrillic |
| Drive type | 42 Stepper motor |
| Table adjustment height | 250mm. |
| Operating temperature | 5-45°C |
| Working humidity | 5-95% |
| Software | DSP offline control EN IDA |
| Guides | 12mm rail + bearing on both axles |
| Lens | 12×50.8mm |
| Mirrors | 20mm |
| Belt | X-axis – 6mm Y-axis – 9mm |
| Blower | yes |
| Water temperature control | |
| Supported formats | AI, BMP, PLT, DXF, DST |
| Cooling system | Water |
| Power supply | 220V/50Hz |
| Power consumption | ≤800W |
| Machine dimensions | 1020x650x650mm |
| Machine weight | 70kg |
| Packed machine dimensions | 1120x750x750mm |
| Packed weight | 90kg |
Description
The TST-5030 50W laser machine is compact, suitable for small industries, designed for processing various types of non-metallic materials. 50W emitter provides cutting and engraving of most decorative materials, such as plywood (4-5mm), acrylic (10-15mm), paper, cardboard, etc. Depending on the selected operating mode, set programmatically or manually, you can cut or engrave the material .
The range of applications of the machine is very wide. Cutting various materials (modeling, design, clothing industry), advertising and souvenir production, engraving of various inscriptions, etc. The honeycomb desktop allows you to cut any soft and flexible materials, such as fabric or film, as well as cut small-sized products without the risk of losing them in scraps. The height-adjustable table allows you to process workpieces up to 250mm high, as well as use a rotating fixture (optional) to process rotational workpieces such as mugs, pens, musical instruments, etc.
The dimensions of the machine allow you to carry it through a standard door. This facilitates the selection of premises for the workshop.
Materials used:
Acrylic, plexiglass, plastic, wood, plywood, ceramics, glass, bamboo, granite, marble, rubber , leather, cloth and other non-metallic materials.
Equipment
Complete set:
• Machine with a laser emitter (laser tube 50W) – 1 pc.
• Pump (cooling system for the laser tube) – 1 pc.
• Air compressor – 1 pc.
• Smoke exhaust system (exhaust fan , corrugated pipe, clamps) – 1 pc.
• Software – 1 pc.
• User manual and software – 1 pc.
• Accessory set – 1 pc
