Laser engraver TST-40B 40W
- Work aream490x300mm
- Engraving speed ≤ 800mm/s
- Cutting speed ≤ 300mm/s
|Laser type||CO2 sealed laser tube|
|Laser power adjustment||Hardware, software|
|Engraving speed||≤ 800mm/s|
|Cutting speed||≤ 300mm/s|
|Cut thickness||≤ 8mm|
|Minimum Font||1.2mm Cyrillic|
|Table adjustment height||100mm|
|Drive Type||Stepper motor|
|Software Compatibility||CorelDraw, Aut oCAD, PhotoShop|
|Supported formats||AI, BMP, PLT, DXF, DST, etc.|
|Cooling system||Water, closed circuit (Pump)|
|Packed machine dimensions||1380x810x520mm|
Laser engraver TST-5030 is a compact desktop laser engraving machine with a new control system. It has built-in memory, which allows you to work on saved jobs without a computer. Electronic power control greatly simplifies and speeds up work. Allows you to perform all operations for the processing of non-metallic materials, as well as large machines, including material cutting. The small sizes allow to use the machine in small rooms – small workshops or advertising agencies. Wide range of applications, unlimited material length, front and rear feed. The adjustable working table allows processing materials up to 100mm thick and using a rotary device for processing cylindrical surfaces. Suitable as a starter equipment for laser cutting and engraving.
Acrylic, plexiglass, plastic, wood, ceramic, glass, bamboo, granite, jade, marble, rubber, leather, cloth and other non-metallic materials.
• Machine with a laser emitter (laser tube) – 1 pc.
• Water pump (laser tube cooling system) – 1 pc.
• Air compressor – 1 pc.
• Smoke removal system (exhaust fan, corrugated pipe, clamps) – 1 pc.
• Software – 1 pc.
• Electronic key to software – 1 pc.
• Operating manual and software – 1 pc.
• Set of accessories – 1pc