Laser cleaning machine TST-LC50
Work area – 1300x900mm
Engraving speed – ≤1200mm/ s
Cutting speed – ≤600mm/s
Description
Additional information
| Laser power | 60W |
| Laser type | CO2 sealed laser tube |
| Laser power control | software |
| Interface | High speed DSP controller |
| Work area | 1300x900mm |
| Engraving speed | ≤1200mm/ s |
| Cutting speed | ≤600mm/s |
| Positioning accuracy | ±0.01mm |
| Laser pointer | yes |
| Minimum character/font | Cyrillic: 2mm |
| Drive type | Step motor |
| Software compatibility | CorelDraw, AutoCAD |
| Sub Supported formats | AI, BMP, PLT, DXF, DST, etc. |
| System cooling | Water |
| Power supply | 220V/50Hz |
| Power consumption | ≤2000W |
Description
The TST-1309 laser machine with a large working area is specially designed for stone work. The detachable design allows you to install the engraver directly on the stone slab for engraving. In addition to stone, it can process any non-metallic materials. Depending on the selected operating mode, set programmatically or manually, you can cut and engrave the material.
The range of applications of the machine is very wide: laser cutting and engraving of non-metallic materials (acrylic, plexiglass, plastic, wood, plywood, leather , fabric, etc.), as well as laser engraving of glass, ceramics, marble, granite, anodized aluminum, metal products. Engraving of metal products requires the use of special sprays designed for laser engraving.
Materials used:
Gwound, jade, marble, acrylic, plexiglass, plastic, wood, ceramics, glass, bamboo, rubber, leather, cloth and other non-metal materials.
Equipment
Complete set:
• Laser machine – 1 pc.
• Laser tube 60W – 1 pc.
• Water pump – 1 pc.
• Air compressor – 1 pc.
• Extractor hood – 1 pc.
• CD with software – 1pc
• Instruction manual and software – 1pc
• Accessory kit – 1pc
