Laser cleaner TST-LC50
- Working area 1300x900mm
- Engraving speed ≤1200mm/s
- Cutting speed ≤600mm/s
Description
Additional information
| Laser power | 60/80W |
| Laser type | CO2 sealed laser tube |
| Laser power control | software</td > |
| Interface | High-speed DSP controller |
| Working area | 1300x900mm |
| Engraving speed | ≤1200mm/s |
| Cutting speed | ≤600mm/s |
| Positioning accuracy | ±0.01mm |
| Laser pointer | Yes |
| Minimum symbol/font | Cyrillic: 2mm |
| Drive type</td > | Stepper motor |
| Software compatibility | CorelDraw, AutoCAD |
| Supported formats | AI, BMP, PLT, DXF, DST, etc. |
| Cooling system | Water |
| Power supply | 220V/50Hz |
| Power consumption | ≤2000W |
Description
The TST-1390 laser machine with a large working area is specially designed for stone work. The detachable design allows you to install the engraver directly on the stone slab for engraving. In addition to stone, it can process any non-metallic materials. Depending on the selected operating mode, set programmatically or manually, you can cut and engrave the material.
The range of applications of the machine is very wide: laser cutting and engraving of non-metallic materials (acrylic, plexiglass, plastic, wood, plywood, leather, fabric and etc.), as well as laser engraving of glass, ceramics, marble, granite, anodized aluminum, metal products. Engraving of metal products requires the use of special sprays designed for laser engraving.
Materials used:
Gwound, jade, marble, acrylic, plexiglass, plastic, wood, ceramics, glass , bamboo, rubber, leather, cloth and other non-metal materials.
Equipment
• Laser machine – 1pc
• Laser tube 80W – 1pc
• Chiller CW-3000 – 1pc
• Air compressor – 1pc
• Extractor hood – 1pc
• CD with software – 1 pc.
• Electronic key for software – 1 pc.
• Instruction manual and software – 1 pc.
• Set of accessories – 1 pc
