Laser cladding and welding machine TST-WF2000F
- Laser Generator Size- 1170mm x 560mm x 1250mm
- Cooling Size – 560mm x 800mm x 400mm
- Desktop Size – 300mm x 400mm
- Z Movement – 300 mm
Description
Additional information
| Model | TST-WM200DP |
| Laser Source | Nd+3:YAG Crystal |
| Laser Wavelength | 1064 nm |
| Output Power | ≤200 W |
| Work area | 300x400x300mm |
| Weld depth | Up to 1.0 mm (depending on material) |
| Laser Pulse Width | 0.1-9.9 ms |
| Repetition rate | 0~50Hz |
| Laser spot diameter | 0.6-3.0 mm |
| Maximum pulse power | 60 J</td > |
| Positioning system | Microscope, red beam, camera (optional) |
| Continuous run time | > ;24 hours |
| Laser Generator Size | 1170mm x 560mm x 1250mm |
| Cooling Size | 560mm x 800mm x 400mm |
| Desktop Size | 300mm x 400mm |
| Z Movement | 300 mm |
| Drive system (optional) | Stepper motor |
| Travel accuracy | 0.05 mm |
| Max load weight | 50 kg |
| Power supply | 380V 3 phase 50Hz 40A |
| Power input | 6kW |
Description
Laser welding is an advanced method of repair, restoration and hardening of various metal products, such as molds, housings, moving parts of machines and equipment, etc. The technology allows you to restore and weld damaged parts of surfaces.
The TST-WM200XT machine has a number of advantages – the laser emitter is made according to British technology using original British materials, which allows you to get high beam quality, constant power and, as a result, excellent welding quality. The intelligent laser control system is convenient to operate and prevents operator error and overheating. The platform can move in three axes.
– The resonator chamber is polished and gilded with high quality, the service life is 8-10 years. Xenon lamps with more than 1 million operating hours.
– Eye protection system from laser radiation.
– The head can be rotated 360 degrees and is height adjustable for convenient work with any product
– Simple and convenient built-in system laser control
– The table moves along three axes, an optional electric drive is installed, to obtain perfectly even seams
– Adjustable spot diameter
Materials used:
Steel for molds S136, SKD-11, NAK80, 8407, 718, 738, H13, P20, W302, 2344 etc.
Equipment
Set contents /standard/
– Machine tool
– Pedal switch
– Manual
– Spare parts kit
