Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
|

Table of examples of parameters for laser cutting and engraving

Please note, all video material are available for Endurance customers at any time.

Due to some reasons we removed our video from official channel, but if you want to watch some of them, just email to George Fomitchev gf@EnduranceRobots.com and we will be able to help you!

Comparison between of 2.1W and 3.5W diode lasers
Material Thickness (mm) Laser (power) Engraving (yes/no) Cutting (yes/no) Notes
TESTS WERE MADE BY ENDURANCE
Plywood 1 2.1 W Yes Yes For cutting many passes needed
Plywood (5 layers) 2 2.1 W Yes Yes For cutting many passes needed
Plywood (3 layers) 3 2.1 W Yes  Yes For cutting many passes needed
Plywood 3,5 2.1 W Yes
Transparent acrylic 3 2.1 W Yes No Backing board needed
Non transparent acrylic 3 5 W Yes Yes
Cardboard 1 2.1 W Yes Yes Several passes needed
Denim 2 2.1 W Yes High speed needed (500)
Leather 2 2.1 W Yes High speed needed (500)
Leather belt inside 4 2.1 W Yes High speed needed (500)
Laser rubber 2,3  2.1 W  Yes
Plastic FlexiColor (Rowmark) 0,5  2.1 W  Yes Yes 4 passes needed for cutting
TESTS WERE MADE BY DARKY LABS
Non transparent acrylic  3 3 W Yes No
Tinted acrylic  3 3 W Yes No
Anodized aluminium  – 3 W Yes No
Brown cardboard  0,45 3 W Yes Yes
Brown cardboard  2 3 W Yes Yes
Double-sided corrugated board  3 3 W Yes Yes
Fabric – cotton  0,27 3 W Yes No
Fabric (Tyvek)  – 3 W No Yes
High-density foam – LD45 10 3 W Yes Yes
Vegetable leather 3,50 3 W Yes No
Vegetable leather 1 3 W Yes Yes
Vegetable leather 2,5 3 W Yes No
Glossy paper 230 gsm 3 W Yes
Photocopying paper 80 gsm 3 W Yes Yes
Paper cards 230 gsm 3 W Yes Yes
Mat surface polyester  – 3 W No
Black synthetical rubber  3 3 W Yes No
Wood – balsa (of middle density)  1,5 3 W Yes Yes
Wood – balsa (of low density)  5 3 W Yes Yes
Wood  – birch 3 layers  1,5 3 W Yes Yes
Wood – mapple  2 3 W Yes No
Wood MDF  3 3 W Yes Yes
Wood – poplar laminated (3 layers)  3 3 W Yes Yes

Share with your friends